Products made by ICI today touch the lives of almost everyone in the world on a daily basis. It creates, develops and markets ingredients for foods and personal care, specialty polymers, electronic materials, fragrances and flavours, and has some of the world's top paint and decorative product brands.

Policy:

ICI Glidden is an environmentally conscious company and strongly supports recycling efforts. As the purchaser of high quality wooden platforms, the company maintains stringent specifications. ICI has appointed recycling facilities that all pallets must be sent to for repair, cleaning, and inventorying.

Repair Specs:

DO NOT REPAIR RECEIVED ICI PALLETS. ALL PALLETS MUST BE RETURNED TO APPOINTED ICI REPAIR FACILITIES. RECEIVERS OF GP STAMPED PALLETS, PLEASE CONTACT ONGWEOWEH OR LOG IN YOUR AVAIABLE PALLETS AT THE GP SITE. YOU WILL BE CONTACTED FOR REIMBURSEMENT AMOUNTS. NEITHER RECEIVERS, ONGWEOWEH, NOR ICI MUST BUY OR SELL GP PALLETS.

Click the "List Pallets" button above to list ICI pallets.

Policy:

This specification must be adhered to for all pallets supplied to gotpallets.com. Any deviation from this specification must be approved in writing prior to any specification changes. Any pallets not meeting the guidelines and specifications outlined below will be rejected at the expense of the vendor.

General Guidelines:

This specification is for a 30” x 42” GP - ICI 8000 four-way entry style pallet. Each pallet must be inspected for cracked or broken deck boards, broken or damaged stringers and protruding nails. Pallets must be inspected for excessive wear and tear and visible contamination. In addition, all pallets must be free of any dirt, mud or sawdust.

The details of this specification are as follows:

Deck Board Requirements:

All deck boards must be a minimum of 5/8” thick and 3 ½” in width. Any damaged deck board must be replaced with the same length, width and thickness board. Damage is defined as any board with a broken off piece greater than 1” x 10”.

If any deck boards are less than 5/8”, they will have to be replaced as noted above. If a pallet has deck boards that are in excess of 5/8” but no more than 3/4” thick, it will be acceptable as long as all boards are of equal thickness. The specs are included in this package as a guideline for board placement and spacing requirements. All pallets provided under this program will be required to meet or exceed these specifications.

The middle bottom deckboard must be 5.5".

Stringer Repairs:

No stringers repair of any kind will be acceptable at this time. Any pallet with damaged or broken stringer must be scraped. Damage is defined as any stringer with a broken off piece greater than 1/2” x 4”. Also, a stringer is considered damaged if a crack is greater than one-half of the length and\or one-half of the width of that board. Cracks caused by lumber drying that do not affect the strength of the pallet are acceptable.

Excessive Wear and Tear; Contamination:

Any pallet that has rotted or deteriorated wood is not acceptable. Pallets that are grayish due to natural weathering are acceptable as long as all other specifications are met.

Nails:

All protruding nails and nail heads must be countersunk. Each board that exceeds 3 ½” in width must be secured with a minimum of two nails at each stringer contact. Repair nails must be drive screw type and a minimum of .099” x 2”.

Repair Lumber:

All repair lumber must be cannibalized from other 30” x 42” ICI pallets or be virgin material.

Program Integrity: